Biosynthesis of membrane bound Ig and secretion of Ig by chicken lymphoid cells.

The metabolic turnover of membrane proteins of chicken lymphoid cells is studied, using a double isotope labeling technique (i.e., [14C]amino acid pulse and [3H]leucine chase). Compared with other membrane proteins, the metabolic turnover of membrane bound immunoglobulins (M-Ig) is very slow. There was no difference in the turnover between M-Ig and specific antigen binding receptor immunoglobulins. Immunoglobulins appear to be a stable constituent of the lumphocyte membrane. Cellular kinetic experiments show that the rate of biosynthesis of secreted immunoglobulins (S-Ig) is nearly ten times as much as that of M-Ig, suggesting that metabolic pathway leading to M-Ig are distinct from those leading to S-Ig. The difference in 3H/14C ratios between S-Ig and M-Ig reflects the rate of biosynthesis of these immunoglobulins by two types of bursa derived lymphoid cells.     

PLASMA CHOLINE: ITS TURNOVER AND EXCHANGE WITH BRAIN CHOLINE1

—The kinetics of plasma choline (Ch) and the uptake of plasma Ch into the brain were studied by means of intravenous infusion of [²H₄]Ch at various rates into anaesthetized and conscious rats. [²H₄]Ch levels in both arterial and venous plasma at steady state were linearly related to the infusion rate; however, unlabelled Ch levels were independent of infusion rate. [²H₄]Ch levels were higher in the arterial plasma than in the venous plasma, while unlabelled Ch levels were higher in the venous plasma than in the arterial plasma. It was concluded that Ch is being generated in the brain and is released into the venous effluent. The supply of Ch to the plasma is not decreased if the plasma Ch level is increased. The clearance and turnover of Ch in the compartment of its initial distribution are 75 ml kg^-1 min^-1 and 716 nmol kg^-1 min^-1, respectively. The uptake of plasma Ch into the brain is not saturated even at very high levels of plasma Ch.     

Comparative proteome analysis using amine-reactive isobaric tagging reagents coupled with 2D LC/MS/MS in 3T3-L1 adipocytes following hypoxia or normoxia

Hypoxia during the expansion of adipocytes is known to contribute both to the secretion of multiple inflammation-related adipokines as well as to obesity. We therefore investigated the nature of protein changes occurring in adipocytes during hypoxia by observation of the intracellular proteins that are expressed in 3T3-L1 adipocytes. Lysates were utilized for quantitative proteome analysis using isobaric tags for relative and absolute quantitation (iTRAQ) combined with peptide separation by multi-dimensional liquid chromatography. Antioxidants and elongation factors, as well as glycolytic enzymes were increased in hypoxic adipocytes. These changes were supported by similar changes suggested by real-time PCR. The proteins showing changes are all potential targets for revering the mechanism behind the phenomenon of induction of obese adipocytes by hypoxia. This study can therefore aid in defining the proteomic changes that occur in adipocytes in response to oxygen stress, and can further characterize adipocyte metabolism and adaptation to low oxygen conditions.     

Indoor environmental study and post occupancy evaluation in an office environment

1. 1. The objective of this paper is to investigate the indoor environment from the viewpoint of interaction between physical environment and the human responses. The field survey has been conducted over 1 year.

2. 2. A continuous measurement has been carried out for 1 week and distribution of variables have been measured for 1 day.

3. 3. The attitude of workers was investigated by a questionnaire.

4. 4. As the result, average luminance represented more than 1000 lx in the new building, in contrast with less tha 300 lx in the existing building.

5. 5. There was a significant difference of the occupants' response to the light environment between the two buildings.

6. 6. Measured thermal conditions are on the edge of the ASHRAE comfort envelope in summer, and in the neighborhood of the lower dry limit of the envelope in spring.

7. 7. The occupants' evaluations were remarkably changed before and after the moving. The office environment is better than that of the factory.

A simple process for the isolation of epithelial cells from bacteria-contaminated samples using anchoring molecules

A simple and efficient tool to isolate epithelial cells from bacteria-contaminated samples has been developed using two different microparticles functionalized with chemical molecules. The epithelial cells could be captured simply by biocompatible anchors for membranes (BAM), consisting of poly(ethylene glycol) functionalized with oleyl-chain-conjugated NHS (N-hydroxysuccinimide) on glass microparticles, whereas bacteria were adsorbed on 3-aminopropyltrimethoxysilane (ATPS)-functionalized magnetic microparticles. In the case of samples highly contaminated with bacteria, epithelial cells were not isolated successfully by both of the single BAM- and antibody-functionalized microparticles. Therefore, serial isolation steps of these two different chemical functionalized microparticles were introduced. The concentration of bacteria was decreased dramatically by using APTS-functionalized magnetic particles prior to the isolation of epithelial cells by BAM microparticles. With these serial processes, successful isolation of epithelial cells was achieved from bacteria-contaminated epithelial samples. The applicability of this method was verified with bacteria-contaminated intestinal samples biopsied from a BALB/C mouse for primary cell cultivation.     

Antifungal effect of CopA3 monomer peptide via membrane-active mechanism and stability to proteolysis of enantiomeric d-CopA3

In our previous study, coprisin, a 43-mer defensin-like peptide, was derived from the dung beetle, Copris tripartitus, and a 9-mer CopA3 (monomer), truncated coprisin analog peptide, was designed. However, the antifungal effects of CopA3 are not known yet. In this study, the antifungal activity and mechanism of CopA3 were investigated and to develop a more effective antimicrobial peptide under physiological conditions, the enantiomeric d-CopA3 was designed. l- and d-CopA3 had a similar antifungal activity without chiral selectivity, and their activity was more potent than that of melittin used as a positive control. Furthermore, l- and d-CopA3 did not even show any hemolysis against human erythrocytes. Membrane studies using propidium iodide and bis-(1,3-dibutylbarbituric acid) trimethine oxonol [DiBAC₄(3)], suggested that the antifungal effect of l- and d-CopA3 was due to the membrane-active mechanism, by contrast with coprisin possessing apoptotic mechanism without membrane permeabilization. Finally, the proteolytic resistance and antifungal activity of l- and d-CopA3 against trypsin was analyzed by HPLC and colony count assay. The results showed that only d-CopA3 maintained a potent antifungal activity despite the proteolytic condition. Therefore, this study suggests that d-CopA3 has potential as a novel antimicrobial agent.     

Comparison of Fabrication Methods Based on Nanoimprinting Lithography for Plasmonic Color Filter Fabrication

The angle-variable tunable optical filter was strictly fabricated by two strategies of nanoimprint-coupled metal nanopatterning with improved cost-effectiveness and accessibility. The tunable optical properties and the performances of two strategies were experimentally examined and turned out to be well matched to numerical results. Tunable properties are obtained by three factors: size of fabricated Ag nanodisks, incident illumination angle, and fabrication strategies. The resonant extinction peak shifts were identified to show a large increase along with the increase in fabricated Ag disk size and increase in the incidence angle of illumination. When comparing a fabrication strategy, it was confirmed that the sample fabricated by the strip-off method has better stability on color changes with a consistent dependency on the incident angle. The presented strategies of fabrication are technically viable for obtaining well-defined plasmonic nanostructures so that it has the feasibility to apply for fascinating optical applications including display or tunable optical filters.

     

Ablation of Gadd45β ameliorates the inflammation and renal fibrosis caused by unilateral ureteral obstruction

The growth arrest and DNA damage‐inducible beta (Gadd45β) protein have been associated with various cellular functions, but its role in progressive renal disease is currently unknown. Here, we examined the effect of Gadd45β deletion on cell proliferation and apoptosis, inflammation, and renal fibrosis in an early chronic kidney disease (CKD) mouse model following unilateral ureteral obstruction (UUO). Wild‐type (WT) and Gadd45β‐knockout (KO) mice underwent either a sham operation or UUO and the kidneys were sampled eight days later. A histological assay revealed that ablation of Gadd45β ameliorated UUO‐induced renal injury. Cell proliferation was higher in Gadd45β KO mouse kidneys, but apoptosis was similar in both genotypes after UUO. Expression of pro‐inflammatory cytokines after UUO was down‐regulated in the kidneys from Gadd45β KO mice, whereas UUO‐mediated immune cell infiltration remained unchanged. The expression of pro‐inflammatory cytokines in response to LPS stimulation decreased in bone marrow‐derived macrophages from Gadd45β KO mice compared with that in WT mice. Importantly, UUO‐induced renal fibrosis was ameliorated in Gadd45β KO mice unlike in WT mice. Gadd45β was involved in TGF‐β signalling pathway regulation in kidney fibroblasts. Our findings demonstrate that Gadd45β plays a crucial role in renal injury and may be a therapeutic target for the treatment of CKD.     

An Antiaging Electrolyte Additive for High‐Energy‐Density Lithium‐Ion Batteries

High‐capacity Li‐rich layered oxide cathodes along with Si‐incorporated graphite anodes have high reversible capacity, outperforming the electrode materials used in existing commercial products. Hence, they are potential candidates for the development of high‐energy‐density lithium‐ion batteries (LIBs). However, structural degradation induced by loss of interfacial stability is a roadblock to their practical use. Here, the use of malonic acid‐decorated fullerene (MA‐C₆₀) with superoxide dismutase activity and water scavenging capability as an electrolyte additive to overcome the structural instability of high‐capacity electrodes that hampers the battery quality is reported. Deactivation of PF₅ by water scavenging leads to the long‐term stability of the interfacial structures of electrodes. Moreover, an MA‐C₆₀‐added electrolyte deactivates the reactive oxygen species and constructs an electrochemically robust cathode‐electrolyte interface for Li‐rich cathodes. This work paves the way for new possibilities in the design of electrolyte additives by eliminating undesirable reactive substances and tuning the interfacial structures of high‐capacity electrodes in LIBs.     

Retarded Charge–Carrier Recombination in Photoelectrochemical Cells from Plasmon‐Induced Resonance Energy Transfer

N‐type metal oxides such as hematite (α‐Fe₂O₃) and bismuth vanadate (BiVO₄) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised of metal oxide films via a facile drying and transfer‐printing process. Through plasmon‐induced resonance energy transfer, the Au array provides a strong electromagnetic field in the near‐surface area of the metal oxide film. The near‐field coupling interaction and amplification of the electromagnetic field suppress the charge recombination with long‐lived photogenerated holes and simultaneously enhance the light harvesting and charge transfer efficiencies. Consequently, an over 3.3‐fold higher photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) is achieved for the Au array/α‐Fe₂O₃. Furthermore, the high versatility of this transfer printing of Au arrays is demonstrated by introducing it on the molybdenum‐doped BiVO₄ film, resulting in 1.5‐fold higher photocurrent density at 1.23 V versus RHE. The tailored metal film design can provide a potential strategy for the versatile application in various light‐mediated energy conversion and optoelectronic devices.